DN-500N
|
|
- Platform scale, Truck scale,
Tension/compression tester, Horse weigher,etc.
- 50 kind of parts number can be memorized
- Watch-dog function installed for diagnostics
- Data back up against power stoppage.
- Front display window covered by lexan film for
the protecting of dust
- Weighing judgment by over & under setting
when printer is connected
- Three kinds of hold function (peak-hold and
averagehold, auto-hold)
- Can drive up to 8pcs of load cell (350.)
- RS-232C and CURRENT LOOP standard installed
|
|
  |
| Specifications |
Accuracy |
| Load cell excitation |
10VDC±5%, 320mA |
| A/D converting speed |
200times/sec |
| A/D converter resolution |
: 1/520,000 counts(19bits), ΔΣ |
| Non-linearity |
0.01% of full scale |
| Zero adjustment range |
-0.6mV~42mV |
| Display Unit |
7 segment, 20.0mm(H)×13.0(W)mm |
| Annunciator |
steady, zero, tare, gross, auto, print, hold,Interface |
| Decimal point position |
0, 0.0, 0.00, 0.000 |
| Keyboard |
Number key and function key 16 PCS. |
| Temperature-drift |
zero ±20PPM/℃, span ±20PPM/℃ |
| Non-linearity |
0.01% of full scale |
| Rear panel |
Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) |
| Power |
SMPS Free Voltage (85V~265V) |
|
Option
① Analog Out-put (V-out) : 0~10V
② Analog Out-put (I-out) : 4~20mA
③ Serial I / F : RS-422, RS-485
④ BCD In-put
⑤ BCD In-out
※ RS3232C and Current loop : Standard Installed |
|
